CurviSlicer: Slightly curved slicing for 3-axis printers
Publication in refereed journal


Times Cited
Web of Science12WOS source URL (as at 09/09/2021) Click here for the latest count
Altmetrics Information
.

Other information
AbstractMost additive manufacturing processes fabricate objects by stacking planar layers of solidified material. As a result, produced parts exhibit a so-called staircase effect, which results from sampling slanted surfaces with parallel planes. Using thinner slices reduces this effect, but it always remains visible where layers almost align with the input surfaces. In this research we exploit the ability of some additive manufacturing processes to deposit material slightly out of plane to dramatically reduce these artifacts. We focus in particular on the widespread Fused Filament Fabrication (FFF) technology, since most printers in this category can deposit along slightly curved paths, under deposition slope and thickness constraints. Our algorithm curves the layers, making them either follow the natural slope of the input surface or on the contrary, make them intersect the surfaces at a steeper angle thereby improving the sampling quality. Rather than directly computing curved layers, our algorithm optimizes for a deformation of the model which is then sliced with a standard planar approach. We demonstrate that this approach enables us to encode all fabrication constraints, including the guarantee of generating collision-free toolpaths, in a convex optimization that can be solved using a QP solver. We produce a variety of models and compare print quality between curved deposition and planar slicing.
All Author(s) ListJimmy Etienne, Nicolas Ray, Daniele Panozzo, Samuel Hornus, Charlie C.L. Wang, Jonas Martinez, Sara McMains, Marc Alexa, Brian Wyvill, Sylvain Lefebvre
Journal nameACM Transactions on Graphics
Year2019
Month7
Volume Number38
Issue Number4
PublisherACM
Article number81
ISSN0730-0301
eISSN1557-7368
LanguagesEnglish-United States

Last updated on 2021-10-09 at 00:39